Back in November I picked up some carbon canister hoses, given there are no instructions where they all go I have been searching the internet for pictures etc. This morning replaced three of the hoses although not completely sure about the one going to the coolant bottle but from what I have found this appears to be one of them.
The others which I think connect to the rigid pipe going to the throttle body I'll attempt another day!!!
BB's TT
Forum rules
Each TTOC Member can post one thread to contain a full journal of their TT ownership.
This can be a full blown build thread or as simple as a set of pictures, the choice is yours.
Each TTOC Member can post one thread to contain a full journal of their TT ownership.
This can be a full blown build thread or as simple as a set of pictures, the choice is yours.
-
- Posts: 577
- Joined: Wed Dec 16, 2015 7:21 pm
- TTOC Membership: 02935
- Location: Preston, Lancashire
Installed a couple more of the carbon canister hoses today and finally managed to do a successful throttle body adaptation using vcds following the battery change that I did a few days ago.
- Attachments
-
- IMG_1649.JPG (721.94 KiB) Viewed 14073 times
-
- IMG_1650.JPG (745.3 KiB) Viewed 14073 times
Mk1 TT225 Coupe 2002
-
- Posts: 577
- Joined: Wed Dec 16, 2015 7:21 pm
- TTOC Membership: 02935
- Location: Preston, Lancashire
Just a small thing, I had noticed this missing some time ago and eventually got round to ordering it from Audi and picked it up today, a bit fiddly to put in place but one more small job ticked off the list of things to do!!!!
- Attachments
-
- IMG_1657.JPG (685.8 KiB) Viewed 14065 times
-
- IMG_1660.JPG (526.76 KiB) Viewed 14065 times
-
- IMG_1663.JPG (575.34 KiB) Viewed 14065 times
Mk1 TT225 Coupe 2002
-
- Posts: 577
- Joined: Wed Dec 16, 2015 7:21 pm
- TTOC Membership: 02935
- Location: Preston, Lancashire
Been meaning to do this for a while but with the weather not being so good it's taken longer than I thought, however today I removed the throttle body and gave it a clean. Wasn't as dirty as I had expected but worth doing none the less.
Once back together did the throttle body adaptation using vcds.
Once back together did the throttle body adaptation using vcds.
- Attachments
-
- IMG_1698.JPG (547.31 KiB) Viewed 13994 times
-
- IMG_1700.JPG (493.57 KiB) Viewed 13994 times
-
- IMG_1701.JPG (444.59 KiB) Viewed 13994 times
Mk1 TT225 Coupe 2002
-
- Posts: 577
- Joined: Wed Dec 16, 2015 7:21 pm
- TTOC Membership: 02935
- Location: Preston, Lancashire
A nice man from UK mail delivered these today just hope I get some free time over the weekend to get them fitted
- Attachments
-
- IMG_1732.JPG (666.68 KiB) Viewed 13959 times
-
- IMG_1733.JPG (595.84 KiB) Viewed 13959 times
Mk1 TT225 Coupe 2002
-
- Posts: 577
- Joined: Wed Dec 16, 2015 7:21 pm
- TTOC Membership: 02935
- Location: Preston, Lancashire
Well I spent some of the weekend tidying the garage to make some space to store my current wheels and winter tyres but today was spent removing wheels and spacers and fitting my new spacers and wheels.
I did discover while doing this that the haldex bonding lead is missing with just the remnants remaining on the two attachment points, so another job to add to the list!!!
I did discover while doing this that the haldex bonding lead is missing with just the remnants remaining on the two attachment points, so another job to add to the list!!!
- Attachments
-
- IMG_1746.JPG (770.22 KiB) Viewed 13946 times
-
- IMG_1755.JPG (1011.04 KiB) Viewed 13946 times
-
- IMG_1748.JPG (929.84 KiB) Viewed 13946 times
Mk1 TT225 Coupe 2002