Thought it was time I started a thread here. Had it about 3 months now and a lot has happened in that time.
So I bought it drove it home and loved it.
Took it to Scotland for work and really loved it.
Now for some pics
My Moro Roadster Thread
Forum rules
Each TTOC Member can post one thread to contain a full journal of their TT ownership.
This can be a full blown build thread or as simple as a set of pictures, the choice is yours.
Each TTOC Member can post one thread to contain a full journal of their TT ownership.
This can be a full blown build thread or as simple as a set of pictures, the choice is yours.
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
So far I have fitted
Boost gauge
Liquid TT
Forge 008 diverted valve
REVO stage 1 map
Front powerflex bushes and cookbot cons
Top strut mounts
Ball joints
Track rod ends
Crome bolts, covers etc in bay
New clutch and release bearing
New fast flow panel filter
Probably a few bits I missed lol
Boost gauge
Liquid TT
Forge 008 diverted valve
REVO stage 1 map
Front powerflex bushes and cookbot cons
Top strut mounts
Ball joints
Track rod ends
Crome bolts, covers etc in bay
New clutch and release bearing
New fast flow panel filter
Probably a few bits I missed lol
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
Some of it was because I wanted to but a few bits had to be done to make it right.Stueyturn wrote:Car looks well, I've always fancied a roadster.
Looks like you've done quite a bit to her in the few months you've had her.
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
Had a little clean up in the engine bay today
Then had a play with the dyno setting on my liquid TT.
This was in 3rd gear, couldn't quite floor it though as thee was a few cars about. (I'm not stupid lol)
Got my cat back milltek exhaust going on Friday with my SFS 3" TIP and new disks. & pads all round.
Thinking about what's next.
Any ideas?
So far I have done
1. WAK box and piper cross panel filter
2. Stainless manifold cover
3. Countersunk engine cover bolts
4. Top strut mounts
5. Anti roll bar
6. ARB links
7. Offside cv boot
8. Forge 008 diverted valve
9. Battery volt meter
10. Cookbot cons with poly bushes
11. Liquid TT
12. Boost gauge
13. New front shocks
14. New front tyres
15. Cat back milltek exhaust (fitted Friday)
16. New mintex pads & disks all round
17. SFS 3" TIP (fitted Friday)
18. REVO stage 1 map
19. REVO SPS switch
Then had a play with the dyno setting on my liquid TT.
This was in 3rd gear, couldn't quite floor it though as thee was a few cars about. (I'm not stupid lol)
Got my cat back milltek exhaust going on Friday with my SFS 3" TIP and new disks. & pads all round.
Thinking about what's next.
Any ideas?
So far I have done
1. WAK box and piper cross panel filter
2. Stainless manifold cover
3. Countersunk engine cover bolts
4. Top strut mounts
5. Anti roll bar
6. ARB links
7. Offside cv boot
8. Forge 008 diverted valve
9. Battery volt meter
10. Cookbot cons with poly bushes
11. Liquid TT
12. Boost gauge
13. New front shocks
14. New front tyres
15. Cat back milltek exhaust (fitted Friday)
16. New mintex pads & disks all round
17. SFS 3" TIP (fitted Friday)
18. REVO stage 1 map
19. REVO SPS switch
REVO Stage 1 Map, Forge 008 DV, DV Cold Side Relocation, SFS 3" TIP, SFS Silicone Boost Hoses, Silicone Vacuum Hose Kit, Lots od Engine Bling, H&R ARB's, Forge Tie Bars, Relentless 3" DP, Relentless Sports CAT, Milltek CAT Back, Liquid TT.
Looks like you've been busy
maybe fit a leon supra front splitter (easy to fit and cost around £20ish), apex springs for it to sit a bit lower and maybe some spacers to fill the wheels out in the arches. They were the first few things I first got mine
maybe fit a leon supra front splitter (easy to fit and cost around £20ish), apex springs for it to sit a bit lower and maybe some spacers to fill the wheels out in the arches. They were the first few things I first got mine